Accu-Tube's stainless steel tube cutting, bending, coiling, fabrication and flaring
stainless steel tubing, small diameter tubing, hypodermic tube stainless steel tubing, small diameter tubing, hypodermic tube stainless steel tubing, small diameter tubing, hypodermic tube stainless steel tubing, small diameter tubing, hypodermic tube stainless steel tubing, small diameter tubing, hypodermic tube stainless steel tubing, small diameter tubing, hypodermic tube

stainless steel tubing, small diameter tubing, hypodermic tube

AS-WELDED TUBE

Strip stock is roll-formed and Tungsten-Inert-Gas (TIG) welded. The weld seam is visible on the outside and inside diameter. The tubing is free of interior lubricants and can be supplied in 3/16", 1/4", 5/16" or 3/8" diameters in either coils or straight lengths at minimum cost. Outside diameter tolerances are +/-.005" and wall thicknesses +/-10%.





WELDED AND DRAWN TUBE

The "As-Welded" tube is drawn without interior lubricants to provide diameters in the range of .010" - .350". The weld seam on the outside diameter is less visible. Tensile strengths from annealed to over 150,000 pounds per square inch can be achieved.





WELDED AND PLUG DRAWN TUBE

The "As-Welded" tube is drawn with external and internal dies. The interior is cleaned of all lubricant after drawing. The weld bead on the inside diameter is minimized, resulting in a weld seam that is less visible on the outside and inside diameters. Tensile strengths from annealed to over 150,000 pounds per square inch can be achieved.





FABRICATION GRADE TUBE

This tube was developed by Accu-Tube Corporation to improve the formability of welded and drawn stainless steel tubing. This tubing is ideal for endforming, flaring, flanging, swaging, spinning, etc. Tensile strengths of annealed or 120,000-150,000 pounds per square inch can be achieved.

(Available in O.D. sizes .095" O.D. thru .260" O.D.)







Accu-Tube Corporation manufactures top quality standard and custom size stainless steel tubing. Sizes from small diameter hypodermic medical tubing .009" OD (.23mm) to .375"OD (9.35mm). Fabrication processes include welding, drawing, straightening, cutting, deburring, cleaning, bending, coiling, endforming, beading, flaring, swaging, and others.



Accu-Tube Corporation

MAILING ADDRESS:
Accu-Tube Corporation
2960 South Umatilla Street
Englewood, Colorado 80110
USA

Phone: (303) 761-2258
Fax: (303) 761-2276
E-MAIL: accutube@accutube.com


Home | Alloys | Product Info. | Technical Info. | Stock Sizes | Fabrication Info. | E-mail Accu-Tube

This page was created with pride by - John Bourque